65Point the camera at a person and press the shutter button fully. The camerawill shoot approximately two seconds after it detects a wink.Choose .● Follow Steps 1 – 2 on p. 61 to choose ,then press the n button for more thanone second.● Press the qr buttons or turn the  dial tochoose , then press the n button.Compose the shot and press theshutter button halfway.● Confirm that a green frame appears aroundthe face of the person who will wink.Press the shutter button fully. The camera will enter shooting stand-by,and [Wink to take picture] will appear on thescreen. The lamp will blink and the self-timersound will play.Face the camera and wink. The shutter will release approximately2 seconds after a wink is detected from theperson with a frame around the person’sface.● To cancel the countdown, press the obutton.Using the Wink Self-TimerWhat if a wink is not detected?• Wink a bit slowly.• A wink may not be detected if eyes are covered by hair or a hat, or when wearingglasses.Downloaded From camera-usermanual.com Canon Manuals
