128You can cut out a portion of a recorded image and save it as a new image file.Choose [Trimming].● Press the n button to choose[Trimming] in the 1 tab, then press the mbutton.Choose an image.● Press the qr buttons or turn the  dial tochoose an image, then press the mbutton.Adjust the trimming area. A frame will appear around the portion ofthe image to be trimmed. The original image will display in the upperleft and the trimmed image will display inthe lower right.● If you move the zoom lever to the left orright, you can change the frame size.● If you press the opqr buttons, you canmove the frame.● If you press the m button, you can changethe frame orientation.● In an image with detected faces, grayframes appear around the faces located inthe upper left image. The frames can beused for trimming. You can switch betweenframes by turning the  dial.● Press the n button.Save as a new image and display.● Follow Steps 4 and 5 on p. 127.TrimmingTrimming AreaTrimming Area DisplayRecorded pixels aftertrimmingDownloaded From camera-usermanual.com Canon Manuals
