Changing the Metering Method87You can change the metering method (brightness measuring function) tomatch the shooting conditions.Choose the metering method.● After pressing the m button, press theop buttons or turn the  dial to choose, then press the m button again.Choose an option.● Press the op buttons or turn the  dialto choose an option, then press the mbutton. The setting will appear on the screen.• The camera may not be able to focus in some conditions.• In low light conditions, AF frames may not turn blue even after pressingthe shutter button halfway. In this case, you can set the focus andexposure with the AF frame setting.• If a correct exposure cannot be obtained, the shutter speed and aperturevalue appear in orange. Release your finger from the shutter button, thenpress it again halfway.• You cannot shoot with the AF lock in this mode.• The [AF-Point Zoom] option in the 4 tab is not available in Servo AFmode.• Not available when using Self-Timer (pp. 60 , 80, 81).Changing the Metering MethodEvaluativeSuitable for standard shooting conditions, including back lit shots.Automatically adjusts the exposure to match the shootingconditions.CenterWeighted Avg.Averages the light metered from the entire frame, but gives greaterweight to the center.Spot Only meters within the (Spot AE Point frame) that appears atthe center of the screen.Downloaded From camera-usermanual.com Canon Manuals
