72You can choose the settings for various functions to suit your preferences.AE stands for Auto Exposure.The focusing range is approximately 5 cm (20 in.) – infinity at maximum wideangle (j), and approximately 1 m (3.3 ft.) – infinity at maximum telephoto(i).Enter G mode.● Follow Steps 1 – 2 on p. 61 to choose G.Adjust the settings according toyour purposes (pp. 73 – 81).Shoot.You can adjust the standard exposure set by the camera in 1/3-stopincrements in the range of -2 to +2.Enter Exposure Compensation mode.● After pressing the m button, press theop buttons or turn the  dial to choose#, then press the m button again.Adjust the brightness.● While watching the screen, press the opbuttons or turn the  dial to adjust thebrightness, then press the m button. The exposure compensation amount willappear on the screen.Shooting in Program AEWhat if the shutter speed and aperture value appear in orange?If a correct exposure cannot be obtained when pressing the shutter buttonhalfway, the shutter speed and aperture value are shown in orange. Try thefollowing settings to obtain the correct exposure.• Turn on the flash (p. 73)• Choose a higher ISO speed (p. 76)Adjusting the Brightness (Exposure Compensation)Downloaded From camera-usermanual.com Canon Manuals
