Using an Eye-Fi Card156Checking Connection InformationYou can check the Eye-Fi card’s access point SSID, or connection status.Choose [Connection info].● Press the n button, then choose[Eye-Fi Settings] from the 3 tab, andpress the m button.● Press the op buttons or turn the  dialto choose [Connection info], then press them button. The Connection info screen will appear.Disabling Eye-Fi TransferYou can set the card to disable Eye-Fi transfer.Choose [Disable] in [Eye-Fi trans.].● Press the n button to choose [Eye-FiSettings] from the 3 tab, then press them button.● Press the op buttons or turn the  dialto choose [Eye-Fi trans.], then press theqr buttons to choose [Disable].What if [Eye-Fi Settings] does not appear?[Eye-Fi Settings] will only appear when an Eye-Fi card is inserted in the camera.If the Eye-Fi card has a write-protect tab, you will not be able to check thecard's connection status, or set [Eye-Fi trans.] to [Disable] when the tab isin the locked position.Downloaded From camera-usermanual.com Canon Manuals
