51To save battery power, the screen turns off, and the camera shuts downautomatically when it is not operated for a certain time.Power Saving during ShootingThe screen will turn off approximately 1 minute after the camera is lastoperated. After about 2 more minutes, the lens will retract and the power willturn off. When the screen has turned off but the lens has not yet retracted,pressing the shutter button halfway (p. 24) turns on the screen and shootingcan continue.Power Saving during PlaybackThe power will turn off approximately 5 minutes after the camera is lastoperated.You can check the current time.● Press and hold the m button. The current time appears.● If you hold the camera vertically whileusing the clock function, it will switch tovertical display. Press the qr buttons orturn the  dial to change the displaycolor.● Press the m button again to cancel theclock display.• You can turn off the power saving function (p. 145).• You can adjust the time before the screen turns off (p. 145).Power Saving Function (Auto Power Down)Clock FunctionsWhen the camera power is off, press and hold the m button, then pressthe ON/OFF button to display the clock.Downloaded From camera-usermanual.com Canon Manuals
