High-Speed Continuous Shooting (High-speed Burst)67Join the subjects and look at thecamera. When the camera detects a new face, thelamp and sound will speed up (the lampremains lit when the flash will fire), and twoseconds later the shutter will release.● To cancel shooting with the timer aftercountdown has started, press the obutton.You can shoot continuously at a maximum speed of approximately8.8 images/second while the shutter button is pressed fully and held.The recording pixel setting will be fixed at (1824 x 1368 pixels).Choose .● Follow Steps 1 – 2 on p. 61 to choose .Shoot. As long as you hold the shutter buttondown, the camera will shoot successiveimages.Changing the number of shotsAfter choosing in Step 1, press the op buttons.Even if your face is not detected after joining the subjects, the shutter willrelease approximately 15 seconds later.High-Speed Continuous Shooting(High-speed Burst)• Focus, exposure and white balance settings are set with the first shot.• Depending on the shooting conditions, camera settings and the zoomposition, the shooting speed may slow down.• As the number of images increases, the shooting speed may slow down.Downloaded From camera-usermanual.com Canon Manuals
