Canon FAX-L2000IP Quick Reference Manual

Also see for FAX-L2000: Simplified guide Reference guide Facsimile guide

Contents

Canon FAX-L2000IP Quick Reference Manual Manual pdf 63 page image

Checking and Setting the Telephone Line 3-73Basic OperationsChecking and Setting the TelephoneLineIf you are not sure what type of telephone line you have, check with your local telephonecompany. To operate the machine, you must know if the machine is connected to a tone orrotary pulse line.The machine can be set to operate with either type of telephone line. The machine is set tooperate through a tone line without making adjustments.Use this procedure to switch the fax setup between tone and pulse dialing.1 Open all three one-touch speed dialing panels ➞ press [DataRegistration] ➞ [▼] or [▲] until <3.FAX SETTINGS> appears ➞press [OK].If necessary, see the steps 1 to 3 of “Registering the Machine’s TelephoneNumber and Unit Name”, on p. 3-4.2 Press [▼] or [▲] until <1.USER SETTINGS> appears ➞ press[OK].3 Press [▼] or [▲] until <1.TEL LINE SETTINGS> appears ➞ press[OK].4 Press [▼] or [▲] until <2.TEL LINE TYPE > appears ➞press [OK].DataRegistrationOKOKFAX SETTINGS1.USER SETTINGS ➞ USER SETTINGS1.TEL LINE SETTINGSOKUSER SETTINGS1.TEL LINE SETTINGS ➞ TEL LINE SETTINGS1.USER TEL NO.OKTEL LINE SETTINGS2.TEL LINE TYPE ➞ TEL LINE TYPETOUCH TONE