Canon FAX-L2000IP Quick Reference Manual

Also see for FAX-L2000: Simplified guide Reference guide Facsimile guide

Contents

Canon FAX-L2000IP Quick Reference Manual Manual pdf 50 page image

Setting a Document2-4Documents and Print Media24 Insert the document fully into the feeder until the leading edgesof the document stops.The following messages appear on the LCD display:NOTE• If the machine already displays before you set your document,a small-sized document, such as a STMT document, may have remained in theautomatic document feeder from a previous fax or copy job. In such a case, remove thesmall-sized document from the automatic document feeder, and set your document.(See Chapter 7, “Troubleshooting”, in the Reference Guide.)Adjusting the Scan SettingsCanon’s original UHQ (Ultra High Quality) imaging technology enables you to send documentsor make copies that are very close to the quality of the original document. For best results,adjust the scan settings for special documents before sending or copying.NOTE• The light indicators on the operation panel tell you the current settings.• After the document is copied, the settings return to the previously set settings before copying.1 Press the appropriate key underneath the indicators repeatedlyto illuminate the desired scan/copy setting.MEM IN USE 4%DOCUMENT READYResolutionUltra FineSuper FineFineStandardDocument TypeTextText/PhotoContrastDarkerStandardLighter