Chapter 3: Operation System informationPage 3-26Session tabThe Session tab provides information on the SMs or BHS Session Count, Reg Count, Re-Reg Count,Uptime, Air delay, PPPoE State and Timeouts.Table 121 Session tab attributesAttribute MeaningSubscriber See Table 120 on page 3-24.LUID See Table 120 on page 3-24.State This filed displays the status of the registered SM.Uptime (Downtime) Once a SM/BHS successfully registers to an AP/BHM, this timer is started. Ifa session drops or is interrupted, this timer is reactivated once re-registration is complete.Session Count This field displays how many sessions the SM/BHS has had with theAP/BHM. Typically, this is the sum of Registration Requests and Re-Registration Requests. However, the result of internal calculation maydisplay here as a value that slightly differs from the sum.If the number of sessions is significantly greater than the number for otherSMs or BHS, then this may indicate a link problem or an interferenceproblem.Registration Requests When a SM/BHS makes a Registration Request, the AP/BHM checks its localsession database to see whether it was registered earlier. If the AP/BHMconcludes that the SM/BHS is not currently in session database and it is validRegistration Request, then the request increments the value of this field.In ideal situation, the Registration Requests indicates total number ofconnected SMs to an AP.NoteThe user can clear Registration Requests by dropping allcurrent sessions of SM (or BHS) from Configuration > Tools >Sessions menu.
