Black plate (6,1)Cadillac Escalade/Escalade ESV Owner Manual - 20116-6 LightingHeadlamp High/Low-Beam Changer5 3 (Headlamp High/LowBeam Changer): To change theheadlamps from low to high beam,push the lever toward the instrumentpanel. To return to low-beamheadlamps, pull the multifunctionlever toward you. Then release it.When the high beams are on, thisindicator light on the instrumentpanel cluster will also be on.Flash-to-PassThis feature lets you use thehigh-beam headlamps to signala driver in front of you that youwant to pass. It works even if theheadlamps are in the automaticposition.To use it, pull the turn signal levertoward you, then release it.If the headlamps are in theautomatic position or on low beam,the high-beam headlamps willturn on. They will stay on as longas you hold the lever toward you.The high-beam indicator on theinstrument panel cluster will comeon. Release the lever to return tonormal operation.The low‐beam headlamps must beon for the flash‐to‐pass featureto work.Daytime RunningLamps (DRL)Daytime Running Lamps (DRL) canmake it easier for others to see thefront of your vehicle during the day.Fully functional daytime runninglamps are required on all vehiclesfirst sold in Canada.The DRL system comes on whenthe following conditions are met:. The ignition is on.. The exterior lamps control isin AUTO.. The transmission is not in Park.. The light sensor determines it isdaytime.When the DRL system is on,only the DRL lamps are on.The taillamps, sidemarker,instrument panel lights, andother lamps will not be on.
