Exit LightingThis feature allows you to select the amount of time youwant the exterior lamps to remain on when it is darkenough outside. This happens after the key is turnedfrom ON/RUN to LOCK/OFF.Press the customization button until Exit Lightingappears on the DIC display. Press the set/reset buttononce to access the settings for this feature. Thenpress the menu up/down button to scroll through thefollowing settings:Off: The exterior lamps will not turn on.30 Seconds (default): The exterior lamps will stay onfor 30 seconds.1 Minute: The exterior lamps will stay on forone minute.2 Minutes: The exterior lamps will stay on fortwo minutes.No Change: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.Approach LightingThis feature allows you to select whether or not to havethe exterior lights turn on briefly during low lightperiods after unlocking the vehicle using the RemoteKeyless Entry (RKE) or keyless access transmitter.Press the customization button until Approach Lightingappears on the DIC display. Press the set/resetbutton once to access the settings for this feature. Thenpress the menu up/down button to scroll through thefollowing settings:Off: The exterior lights will not turn on when you unlockthe vehicle with the transmitter.On (default): If it is dark enough outside, the exteriorlights will turn on briefly when you unlock the vehiclewith the transmitter.The lights will remain on for 20 seconds or until the lockbutton on the transmitter is pressed, or the vehicle isno longer off. See Remote Keyless Entry (RKE) SystemOperation on page 2-7 and Keyless Access SystemOperation on page 2-9 for more information.No Change: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-72
