Bosch AUTODOME IP starlight 5000i IR User Manual

Also see for AUTODOME IP starlight 5000i IR: User manual User manual Instruction manual

AUTODOME IP starlight 5000i IR Operation via the browser | en 57Bosch Security Systems User Manual 2023-01 | 1.3 |10.1.11 Recording live videoVideo sequences from the displayed live video stream can be saved locally on the computer'shard drive. The sequences are recorded at the resolution specified in the encoderconfiguration. The storage location depends on the configuration of the camera.1. Click the recording icon to record video sequences.– Saving begins immediately. The red dot on the icon indicates that a recording is inprogress.2. Click the recording icon again to stop recording.10.1.12 Video Security AppStart Video Security appTo start the Video Security app, click .10.1.13 Show latest eventClick the Show latest event icon to watch the last recorded important event.The Playback page opens.10.1.14 Audio communicationAudio can be sent and received via the Live page if the unit and the computer support audio.1. Press and hold the F12 key on the keyboard to send an audio signal to the unit.2. Release the key to stop sending audio.All connected users receive audio signals sent from the unit but only the user who firstpressed the F12 key can send audio signals; others must wait for the first user to release thekey.10.1.15 Storage, CPU and network statusWhen you access the unit with a browser, the icons in the list that follows are at the top rightcorner of the window:– CPU load icon– Network load iconThe information from the icons can help with solving problems with the unit or with fine-tuning the unit.Hover over the CPU load icon to see the CPU load. If the CPU load is too high, change theVCA settings.Hover over the Network load icon to see the network load. If the network load is too high,change the encoder profile to reduce the bitrate.10.1.16 Status iconsVarious overlays in the video image provide important status information. The overlays providethe following information:Decoding errorThe frame might show artifacts due to decoding errors.