Bosch AUTODOME IP starlight 5000i IR User Manual

Also see for AUTODOME IP starlight 5000i IR: User manual User manual Instruction manual

AUTODOME IP starlight 5000i IR Alarm | en 39Bosch Security Systems User Manual 2023-01 | 1.3 |!Caution!Please note that in some circumstances, a larger bandwidth must be available on the networkfor additional video images in the event of an alarm, in case Multicast operation is notpossible. To enable Multicast operation, select the UDP option for the Video transmissionparameter here and on Network Access.StreamSelect the number of the stream from the drop-down list.Remote portDepending on the network configuration, select a browser port here. The ports for HTTPSconnections will be available only if the On option is selected in the SSL encryptionparameter.Video outputIf you know which unit is being used as the receiver, you can select the analog video output towhich the signal should be switched. If the destination unit is unknown, it is advisable toselect the First available option. In this case, the image is placed on the first free videooutput. This is an output on which there is no signal. The connected monitor only displaysimages when an alarm is triggered. If you select a particular video output and a split image isset for this output on the receiver, you can also select from Decoder the decoder in thereceiver that is to be used to display the alarm image.iNotice!Refer to the destination unit documentation concerning image display options and availablevideo outputs.DecoderIf a split image is set for the selected video output, select a decoder to display the alarmimage. The decoder selected determines the position in the split image.SSL encryptionSSL encryption protects data used for establishing a connection, such as the password. Byselecting On, only encrypted ports are available for the Remote port parameter. SSLencryption must be activated and configured on both sides of a connection.The appropriate certificates must also have been uploaded. (Certificates can be uploaded onthe Maintenance page.)Configure and activate encryption for media data (such as video, metadata or audio whenavailable) on the Encryption page (encryption is only available if the appropriate license isinstalled).AudioSelect On to activate audio alarms.7.2 Video Content Analysis (VCA)Note: This section of the manual provides an overview of the fields and the options for eachfield on the page VCA. This section is not a complete tutorial of setting up VCA. For moreinformation, refer to the separate manualVideo Content Analysis (VCA), available on theproduct page for Intelligent Video Analytics. Access the product page on the online productcatalog through the appropriate link from https://www.boschsecurity.com/xc/en/product-catalog/.