Bosch AUTODOME IP starlight 5000i IR User Manual

Also see for AUTODOME IP starlight 5000i IR: User manual User manual Instruction manual

AUTODOME IP starlight 5000i IR Recording | en 33Bosch Security Systems User Manual 2023-01 | 1.3 |Note: For more information about Automatic Network Replenishment (ANR), refer to the WhitePaper “ANR 2.0 Automatic Network Replenishment (ANR),” available on the product page foryour camera. Access the product page on the online product catalog through the appropriatelink from https://www.boschsecurity.com/xc/en/product-catalog/.6.2.3 Activating and configuring storage mediaAvailable media or iSCSI drives must be transferred to the Managed storage media list,activated, and configured for storage.Note:An iSCSI target storage device can only be associated with one user. If a target is being usedby another user, ensure that the current user no longer needs the target before decouplingthat user.1. In the Storage overview section, double-click a storage medium, an iSCSI LUN or one ofthe other available drives.– The medium is added as a target in the Managed storage media list.– Newly added media is shown as Not active in the Status column.2. Click Set to activate all media in the Managed storage media list.– The Status column shows all media as Online.3. Check the box in the Rec. 1 or Rec. 2 column to specify the recording tracks to berecorded on the target selected.6.2.4 Formatting storage mediaAll recordings on a storage medium can be deleted at any time. Check the recordings beforedeleting and back-up important sequences on the computer's hard drive.1. Click a storage medium in the Managed storage media list to select it.2. Click Edit below the list.3. Click Format in the new window to delete all recordings in the storage medium.4. Click OK to close the window.6.2.5 Deactivating storage mediaA storage medium in the Managed storage media list can be deactivated. It is then no longerused for recordings.1. Click a storage medium in the Managed storage media list to select it.2. Click Remove below the list. The storage medium is deactivated and removed from thelist.6.3 Recording ProfilesA recording profile contains the characteristics of the tracks that are used for recording. Thesecharacteristics can be defined for ten different profiles. The profiles can then be assigned todays or times of day on the Recording Scheduler page.Each profile is color-coded. The names of the profiles can be changed on the RecordingScheduler page.To configure a profile, click its tab to open its settings page.– To copy the currently visible settings to other profiles, click Copy Settings. A windowopens to select the target profiles for the copied settings.– If you change a profile’s settings, click Set to save.– If necessary, click Default to return all settings to their factory defaults.