Bosch AUTODOME IP starlight 5000i IR User Manual

Also see for AUTODOME IP starlight 5000i IR: User manual User manual Instruction manual

56 en | Operation via the browser AUTODOME IP starlight 5000i IR2023-01 | 1.3 | User Manual Bosch Security Systems10.1.6 Special FunctionsTour A / Tour BClick one of these buttons to start the continuous playback of a recorded (guard) tour. Arecorded tour saves all manual camera movements made during the recording, including itsrate of pan, tilt and zoom speeds, and other lens setting changes.To stop a tour, click a directional control in the View Control tab.Find homeClick this button to trigger the camera to seek its home position. The OSD displays themessage, “OSD: Finding Home Position.”FocusClick this button to activate the Auto Focus One Push mode on the camera.The OSD displays the message, “Auto Focus: ONE PUSH.”Night modeClick this button to activate/deactivate night mode for the camera. After a few seconds, thecamera switches modes.Note: This function is only available for IR models.Note: This function is only available for IR models.Custom tourClick this button to view (in continuous playback) a custom tour that was previouslyconfigured.To stop a tour, click a directional control in the PTZ section of the page.10.1.7 Recording statusThe hard drive icon below the live camera image changes during an automatic recording.The icon lights up and displays a moving graphic to indicate a running recording. If norecording is taking place, a static icon is displayed.10.1.8 Date and TimeDate/Time(unlabeled)The unlabeled date and time ticker appears above the row of icons (including) that is below the lower-left corner of the live video image.10.1.9 Full-screen videoClick the full-screen icon to view the selected stream in full-screen mode; press Escon the keyboard to return to the normal viewing window.10.1.10 Saving snapshotsIndividual images from the displayed live video stream can be saved locally in JPEG format onthe computer's hard drive. The storage location depends on the configuration of the camera.– Click the photo camera icon to save a single image.