Bosch AUTODOME IP starlight 5000i IR User Manual

Also see for AUTODOME IP starlight 5000i IR: User manual User manual Instruction manual

18 en | Camera AUTODOME IP starlight 5000i IR2023-01 | 1.3 | User Manual Bosch Security Systems5.1.1 Display StampingVarious overlays or “stamps” in the video image provide important supplementary information.These overlays can be enabled individually and are arranged on the image in a clear manner.The drop-down menus below allow the configuration of the individual stamping options. Therespective sample windows show a preview of the configured text and background styles.Click Set to apply the changes.Global configurationiNotice!These options can also be configured individually for all stamping settings.Any changes to the global configuration settings will be applied to all stamping settings!Camera name stampingSelect the position of the camera name overlay in the drop-down box. It can be displayed atthe Top, at the Bottom, or at a position of choice using the Custom option, or it can be set toOff for no overlay information.If the Custom option is selected, enter values in the X and Y position fields.Stamping sizeSelect the desired font size of the overlays on the OSD: Normal or Large.Select Custom to enable the Font size (‰) field.Font sizeEnter a number for a custom size (percentage) of the font, from 1 to 1000.Text colorSelect the color for the alarm message to be displayed in.Background colorSelect the background color for the alarm message to be displayed in.If you have enabled the Transparent background option, the background color is notdisplayed in the OSD.Transparent backgroundCheck this box to make transparent the stamp background on the image.Optionally, tick the Underlay with full-width bar box to place a full-width background-barbeneath the time stamp.Logo stampingLogo positionSelect the position for the logo on the OSD: To the left of the name, To the right of thename, or Logo only.Select Off (the default value) to disable logo positioning.– Transparent backgroundEnable this option to hide the logo's background.To place a logo on the image, select and upload an uncompressed .bmp file with a maximumsize of 1024 x 1024 pixels and 16M colors to the camera.Time stampingSelect the position of the time and date overlay in the drop-down box. It can be displayed atthe Top, at the Bottom, or at a position of choice using the Custom option, or it can be set toOff for no overlay information.If the Custom option is selected, enter values in the X and Y position fields.