Bosch AUTODOME 7100i User Manual

Also see for AUTODOME 7100i: Installation manual Installation manual

12 en | Operation via the browser AUTODOME 7100i2022-12 | V01 | DOC User Manual Bosch Security Systems B.V.Recording live videoVideo sequences from the displayed live video stream can be saved locally on the computer'shard drive. The sequences are recorded at the resolution specified in the encoderconfiguration. The storage location depends on the configuration of the camera.1. Click the recording icon to record video sequences locally.– Saving begins immediately. The red dot on the icon indicates that a local recording isin progress.2. Click the recording icon again to stop the local recording.Audio CommunicationAudio can be sent and received via the Live page if the device and the computer supportaudio.1. Press and hold the F12 key on the keyboard to send an audio signal to the unit.2. Release the key to stop sending audio.All connected users receive audio signals sent from the device but only the user who firstpressed the F12 key can send audio signals; others must wait for the first user to release thekey.Storage, CPU and network statusWhen accessing the unit with a browser, the local storage , processor, WLAN, and networkstatus icons are shown in the upper right of the window.When a local storage card is available, the memory card icon changes color (green, orange orred) to indicate the local storage activity. If you hover over this icon with the mouse thestorage activity is shown as a percentage.If you hover over the processor icon, the CPU load is shown.If you hover over the WLAN icon, the WLAN status is shown.If you hover over the right-hand icon, the network load is shown.This information can help with problem solving or when fine tuning the device. For example:– If the storage activity is too high, change the recording profile.– If the CPU load is too big, change the VCA settings.– If the network load is too big, change the encoder profile to reduce bitrate.Status iconsVarious overlays in the video image provide important status information. The overlays providethe following information:Decoding errorThe frame might show artifacts due to decoding errors.Alarm flagIndicates that an alarm has occurred.Communication errorA communication error, such as a connection failure to the storage medium, a protocolviolation or a timeout, is indicated by this icon.