Bosch AUTODOME 7100i User Manual

Also see for AUTODOME 7100i: Installation manual Installation manual

AUTODOME 7100i Operation via the browser | en 11Bosch Security Systems B.V. User Manual 2022-12 | V01 | DOCAUX onClick this button to switch an AUX command On.AUX offClick this button to switch an AUX command Off.Intelligent TrackingSelect the option for object tracking. If Click is selected, use the mouse to click on an objectto track it.When Intelligent Tracking is active, a tracking icon is shown on the image togetherwith the lines that track moving objects.Digital I/ODepending on the configuration of the unit, the alarm input and the output are displayed nextto the image. Expand the Digital I/O group if necessary.The alarm symbol is for information and indicates the status of an alarm input:– The symbol lights when the input alarm is active.The alarm output allows the operation of an external device (for example, a light switch or adoor opener).– To activate the output, click the checkmark symbol.– The symbol lights when the output is activated.Special FunctionsScan 360°Click this button to start a continuous 360° pan. To stop the continuous pan, click adirectional control in the View Control tab.Auto panClick to pan the device between user-defined limits. To stop the pan, click a directionalcontrol in the PTZ tab.Tour A / Tour BClick one of these buttons to start the continuous playback of a recorded (guard) tour. Arecorded tour saves all manual camera movements made during the recording, including itsrate of pan, tilt and zoom speeds, and other lens setting changes.To stop a tour, click a directional control in the View Control tab.Note: Tour B is now intended for use with the 'IVA while moving' functions.FocusClick this button to activate the Auto Focus One Push mode on the camera.The OSD displays the message, “Auto Focus: ONE PUSH.”Custom tourClick this button to view (in continuous playback) a custom tour that was previouslyconfigured.CrosshairsClick to show/hide the crosshairs in the live image.Recording statusThe hard drive icon below the live camera image changes during an automatic recording.The icon lights up and displays a moving graphic to indicate a running recording. If norecording is taking place, a static icon is displayed.