uuWhen DrivinguStarting the Engine344Driving1. Depress the brake pedal and press the ENGINE START/STOP buttonsimultaneously.2. Keeping your right foot on the brake pedal, release the parking brake. Check thatthe parking brake indicator has gone off.2 Parking Brake P. 4123. Change the gear position to (D. Select (R when reversing.4. Gradually release the brake pedal and gently depress the accelerator pedal to pullaway.■ Hill start assist systemHill start assist keeps the brake engaged briefly to help prevent the vehicle fromrolling on inclines as you move your foot from the brake pedal to the accelerator.Change the gear position to (D or (S when facing uphill, or (R when facingdownhill, then release the brake pedal.The brakes remain engaged briefly as you release the brake pedal.■ Starting to Drive 1Starting to DriveThe engine stops when the gear position is changedfrom (P before the ENGINE START/STOP button ispressed. Follow the step 1 when starting to drive.When the engine was started using the two-way keylessaccess remote *When the engine was started using the two-way keyless access remote *When the engine was started in any case1Hill start assist systemHill start assist may not prevent the vehicle fromrolling downhill on a very steep or slippery slope, andwill not operate on small inclines.Hill start assist is not a replacement for the parkingbrake.* Not available on all models16 ACURA MDX-31TZ56200.book 344 ページ ２０１５年３月４日 水曜日 午後２時５９分
