318FeaturesCompass *When you set the power mode to ON, the compass self-calibrates, and the compassdisplay appears.Compass CalibrationIf the compass indicates the wrong direction, or the CAL indicator blinks, you needto manually calibrate the system.1. Set the power mode to ON.2. On the top screen of any audio source,press and hold for five seconds.u The display switches to the Compasssettings screen.3. Rotate to select Calibration, then press.4. When the display changes to CalibrationStart, press .5. Drive the vehicle slowly in two circles.u The compass starts to show a directionafter the calibration. The CAL indicatorgoes off.1Compass*Compass operation can be affected under thefollowing conditions:• Driving near power lines or stations• Crossing a bridge• Passing a large vehicle, or driving near a largeobject that can cause a magnetic disturbance• When accessories such as antennas and roof racksare mounted by magnets1Compass CalibrationCalibrate the compass in an open area.While setting the compass, press the BACK button tocancel the setting mode and return to the previousscreen.* Not available on all models16 ACURA MDX-31TZ56200.book 318 ページ ２０１５年３月４日 水曜日 午後２時５９分
