169uuOperating the Switches Around the Steering WheeluDriving Position Memory SystemContinuedControlsDriving Position Memory SystemYou can store two driver’s seat (except for power lumbar), steering wheel and doormirror positions with the driving position memory system.When you unlock and open the driver’s door with a remote transmitter, or keylessaccess system, the seat and door mirrors adjust automatically to one of the twopreset positions.The steering wheel will move to the stored position when you set the power modeto ACCESSORY.The MID shows you which remote transmitter you used to unlock the vehicle whenyou enter.• DRIVER 1 transmitter is linked to memory button 1.• DRIVER 2 transmitter is linked to memory button 2.The driver’s seat moves rearward and steeringwheel fully up depending on the set seatingposition once you• Stop the vehicle.• Put the transmission in (P.• Turn the engine off.• Then open the driver’s door.Once the power mode is in the ACCESSORYposition, the driver’s seat driver’s seat andsteering wheel moves to the DRIVER 1 or 2preset position.1Driving Position Memory SystemUsing the audio/information screen or MID, you candisable the automatic seat, steering wheel and doormirrors adjustment function.2 Customized Features P. 117, 263The driver’s seat easy exit feature:• Can be turned ON/OFF.2 Customized Features P. 117System OperationThe system will not operate if:• The vehicle speed is above 3 mph (5 km/h).• Either memory position button is pressed while theseat or steering wheel is in motion.• The seat or steering wheel position is adjustedwhile in operation.• The memory 1 or 2 position is set fully to the rear.DRIVER 1 DRIVER 216 ACURA MDX-31TZ56200.book 169 ページ ２０１５年３月４日 水曜日 午後２時５９分
