282FeaturesHomeLink® Universal TransceiverThe HomeLink® Universal Transceiver can be programmed to operate up to threeremote controlled devices around your home, such as garage doors, lighting, orhome security systems.Refer to the safety information that came with your garage door opener to test thatthe safety features are functioning properly. If you do not have the safetyinformation, contact the manufacturer.Before programming HomeLink, make sure that people and objects are out of theway of the garage or gate to prevent potential injury or damage.When programming a garage door opener, park just outside the garage door’spath.Training HomeLinkIf you have not trained any of the buttons inHomeLink before, you should erase anypreviously learned codes. To do this:• Press and hold the two outside buttons forabout 20 seconds, until the red indicatorblinks. Release the buttons, and proceed tostep 1.• If you are training the second or thirdbutton, go directly to step 1.■ Important Safety Precautions1HomeLink® Universal TransceiverHomeLink® is a registered trademark of GentexCorporation.Before programming HomeLink to operate a garagedoor opener, confirm that the opener has an externalentrapment protection system, such as an “electroniceye,” or other safety and reverse stop features. If itdoes not, HomeLink may not be able to operate it.Red Indicator16 ACURA MDX-31TZ56200.book 282 ページ ２０１５年３月４日 水曜日 午後２時５９分
