AEG B57415A User Manual

AEG B57415A User Manual Manual pdf 44 page image

Cleaning and care44Pyrolytic cleaning1 Warning: The oven gets extremely hot during this process. Young children mustbe kept away.1 Important! Before carrying out pyrolytic cleaning, all removable parts includingthe side rails, must be removed from the oven.3 If you use the oven shelf runners that are available as special accessories, thesemust be removed before pyrolytic cleaning.If the side rails or oven shelf runners are still in place, ‘C1’ appears in the clockdisplay.The pyrolytic cleaning process then cannot be started due to a safety cut-outthat protects the side rails/oven shelf runners.Pyrolytic cleaning1. First remove the worst of the residue manually.2. Select oven function Pyroluxe .– “3:15” appears in the display,– Cook time flashes for approx. 5 seconds.Pyrolytic cleaning then starts.3 The Light does not work.When a pre-set temperature is reached, the door is locked.The bars of the heat indicator light up, until the door is unlocked again.Changing the length of time for the pyrolytic cleaning1. Proceed as described in the section “Pyrolytic cleaning”.2. As long as Cook time is flashing, select the desired length for the processusing or :“ / 2:15” or “3:15”Cook time flashes for approx. 5 seconds.Pyrolytic cleaning then starts.3 If Cook time is no longer flashing, press the Select button again andthen perform the setting procedure.Changing the switch-off time for the pyrolytic cleaningThe switch-off timecan be delayed using the clock function End time (within2 minutes of the pyrolytic cleaning starting).When the different processes for pyrolytic cleaning are set:P2 - 2:15 = Pyroluxe easy: For a light degree of soiling,P1 - 3:15 = Pyroluxe intensive: For a high degree of soiling.