ADEMCO Vista-10SEa User Manual

Also see for Vista-10SEa: Installation and setup guide User guide

ADEMCO Vista-10SEa User Manual Manual pdf 5 page image

– 5 –SYSTEM OVERVIEW (cont)AlarmsWhen an alarm occurs, both the keypad and external sounders will sound,and a message at the keypad will identify the zone(s) causing the alarm. Inaddition, if your system is connected to a central monitoring station, analarm message will be sent. To stop the alarm sounding, you simply disarmthe system.Fire ProtectionThe fire protection portion of your security system (if used) is always activeand will sound an alarm if a fire condition is detected. When an alarm (ortrouble) condition occurs, the keypad displays the number(s) of the zone(s)that caused the problem, and displays the type of alarm or trouble — “FIRE”and “ALARM,” or “CHECK” for trouble. The display remains until it iscleared by entering an OFF sequence (your security code + OFF key) twice.Chime FeatureYour system can be set to alert you to the opening of a door or window whileit is disarmed by using the CHIME mode. In this mode, three tones willsound at the keypad(s) whenever a door or window is opened.Phone Access and Voice Response Capability (optional)Your system may include a phone module that will permit you to access thesystem via a TouchTone phone, either on-premises or by call-in when you areaway. The phone access feature will enable you to do the following:• Receive synthesized voice messages over the telephone regarding thestatus of the security system.• Arm and disarm the system and perform most function commands via thetelephone, with voice confirmation provided after each command entry.www.PDF-Zoo.com