ADEMCO Vista-10SEa User Manual

Also see for Vista-10SEa: Installation and setup guide User guide

ADEMCO Vista-10SEa User Manual Manual pdf 15 page image

– 15 –BYPASSING PROTECTION ZONESUsing the BYPASS 6 KeyLIMITATION: The system will not allow fire zones to be bypassed.Use this key when you want to arm your system with one or more zonesintentionally unprotected. The system must be disarmed first.1. Enter your security code and press the BYPASS key.2. Enter the zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13,etc.). Single-digit zone numbers must be preceded by a zero (e.g., 05, 06).3. When finished, the keypad will momentarily display a "BYPASS" messagefor each bypassed zone number. Wait for these zones to be displayed, toconfirm their bypass.4. Arm the system as usual.Bypassed zones are unprotected and will not cause an alarm if violatedwhile your system is armed.All bypasses are removed when an OFF sequence (security code plus OFF) isperformed.TYPICAL MOMENTARY DISPLAYSOF BYPASSED ZONES&=4%77 *63289478%-67&)(6331ALPHABYPASSACFIXED-WORDwww.PDF-Zoo.com