144 Program featuresSpeed profileThe Speed profile functions automatically select a set of acceleration, decelerationand jerks into use based on the elevator operation mode. Acceleration/deceleration selectionThe Acceleration/deceleration function selects the acceleration and decelerationused based on the elevator operation mode as follows:• When the evacuation mode is active, parameters 25.88 EVAC MODE ACC and25.89 EVAC MODE DEC are used for acceleration and deceleration, respectively.• When the inspection mode is active, parameters 25.86 INSPECT MODE ACCand 25.87 INSPECT MODE DEC are used for acceleration and deceleration,respectively.• When the releveling mode is active, parameter 25.90 RELVL ACC/DEC is usedfor acceleration and deceleration.• During the normal travel mode, either parameters 25.82 ACC1 / 25.83 DEC1 or25.84 ACC2 / 25.85 DEC2 are used for acceleration and deceleration, dependingon the selection made with parameter 25.80 ACC/DEC SEL.Acceleration/deceleration sets 1 and 2 are used during the normal travel mode asshown below :Speed25.80 ACC/DEC SEL = FALSE25.81 ACC1 25.82 DEC125.84 DEC2Time25.80 ACC/DEC SEL = TRUESpeed25.83 ACC225.84 DEC225.84 DEC2TimeSpeedSpeed25.82 ACC125.83 DEC125.85 DEC225.85 DEC225.85 DEC225.84 ACC2Time25.80 ACC/DEC SEL = False25.80 ACC/DEC SEL = True Time
