Installation ManualH3C S7500 Series Ethernet Switches Chapter 7 Software Maintenance7-151) Download program files to the switch using FTP ftp 10.10.110.1Trying ...Press CTRL+K to abortConnected.220 WFTPD 2.0 service (by Texas Imperial Software) ready for new userUser(none):lyt331 Give me your password, pleasePassword:230 Logged in successfully[ftp] binary[ftp] get S7506R002.app S7506R002.app[ftp] get BTM530.btm[ftp] bye2) Load the Boot ROM (Skip this step if Boot ROM loading is not required).Note:If you need to load a Boot ROM to the LPU as well as SRPUs, load the Boot ROM to theLPU first and then to the active and standby SRPUs.z Load the Boot ROM to the LPU. boot bootrom BTM530.btm slot 3This will update BootRom file on board 3 . Continue? [Y/N] yType Y and press Enter. The terminal displays the following information:Board 3 upgrading BOOTROM, please wait...Load finished!Start Upgrading...Frame 0 IO Board 3 upgrade BOOTROM succeeded!z Load the Boot ROM to the active SRPU. boot bootrom SRPUbtm.app slot 0Board 0 upgrading BOOTROM, please wait...Upgrade board 0 BOOTROM succeeded!3) Load host software to the active SRPU.z Load the primary file. boot boot-loader primary S7506R002.app slot 0z Load the backup file. boot boot-loader backup S7506R001.app slot 0 display boot-loaderThe primary app to boot of board 0 at the next time is: flash:/S7506R002.app
