3Com Router Command Reference Guide — V1.005 minutes input rate 0.00 bytes/sec, 0.00 packets/sec5 minutes output rate 0.00 bytes/sec, 0.00 packets/secInput queue : (size/max/drops) 0/50/0FIFO queueing: FIFOOutput queue: (size/max/drops)FIFO: 0/75/0input packets:8, bytes:108, no buffers:0output packets:8, bytes:108, no buffers:0input errors:0, CRC:0, frame errors:0overrunners:0, aborted sequences:0, input no buffers:0DCD=UP DTR=UP DSR=UP RTS=UP CTS=UPTable 1-1 The information of interfaceField DescriptionSerial0 is up The status of interface physical layer.line protocol is up The status of interface data link layer.5 minutes input rate The input rate of the interface within recent 5 minutes.5 minutes output rate The output rate of the interface within recent 5 minutes.Input queue : (size/max/drops) The length of the input interface.FIFO queuing: FIFO The type of the output interface.Output queue: (size/max/drops) FIFO: The length of the output interface.input packets:8, bytes:108, no buffers:0The number of packets received by interface.The number of bytes received by interface.The number of packets dropped by interface because the bufferis full.output packets:8, bytes:108, no buffers:0The number of packets sent by interface.The number of bytes sent by interface.The number of packets dropped by interface because the bufferis full.input errors:0, CRC:0, frame errors:0 The number of error packets received by interface, includingCRC error and frame error.DCD=UP DTR=UP DSR=UP RTS=UPCTS=UP The status of signal DCD, DTR, DSR, RTS, CTS.1.1.3 display interfaces briefSyntaxdisplay interfaces brief6
