3Com 3C13618 Command Reference Manual

Contents

3Com 3C13618 Command Reference Manual Manual pdf 625 page image

Routing Protocol[3Com-route-policy] if-match length 100 2006.1.9 ip local policy route-policySyntaxip local policy route-policy policy-nameundo ip local policy route-policyViewSystem viewParameterpolicy-name: Name of the routing policy.DescriptionUsing the ip local policy route-policy command, you can enable local policy routing.Using the undo ip local policy route-policy, you can cancel a local policy routing.By default, local policy routing is disabled.This ip local policy route-policy command is used to enable or disable local policyrouting for the received packets. It is recommended that users without special needsshould not configure local policy routing.For related commands, see ip policy route-policy.Example# Enable local policy routing on the interface.[3Com] ip local policy route-policy AAA6.1.10 ip policy route-policySyntaxip policy route-policy policy-nameundo ip policy route-policyViewInterface view137