Free minutes option 4.6614.6 Free minutes optionBasic descriptionWith Firmware 3.5x only!Free minutes option allows user to control amount of minutes used for four groups ofoperators in one month period. The user than knows, if performed calls are included infree minutes bundle, or if he has to pay extra price for it. Calls for extra price can bedisabled. All setting done by customer is accessible by DTMF setting.Setting of prefixes (operators) in four banks can be changed using PCManager. Thissetting, the amount of free minutes in every bank and rules for time counting arepreset from factory.Programming of parameters is done the same way like programming of all othergateway parameters. To change free minutes option parameters, you can either:∑ Use the DTMF programming on a telephone line. There are parameters, whichcan be programmed using telephone line based programming with passwordaccess as described in part 3.1 and commands with direct access, used thesame way as command for configuration of network services as described inpart 4.1.∑ Use a PC with the PCManager installed.Parameters – password accessCall with empty bank permitted Function No.: 310The call with empty Bank is either disabled or permitted. When the bank isempty, you hear after dial refusing tone. With call disabled is followed byBusy tone and the call can’t be established. With call permitted you canhang up the call, otherwise the call is established and charged.Setting options: 0/1 (disabled / permitted)Default setting: 0Date for automatic refill Function No.: 311The day in month, when all four banks of free minutes will be refilled withpredefined values. The refilling is done in time 00:00:01 of selected day.When the date for refill doesn't exist (31.2.), the refill is done first day afterthis date (1.3.).Setting options: 0-31 (0 – function off)Default setting: 0Next automatic refill – information fieldMinutes available till the end of billing period.