Table of Parameters 3.234Replace character + in CLI by Function No.: 149If this parameter is filled, the + character in the international prefix of CLI isreplaced by the defined string. The + character can neither be transmitted bythe FSK protocol nor dialed by the DTMF from a terminal.Setting options: 0-4 characters (0-9,*,#)Default setting: blankAutomatic callBabyCall number Function No.: 180A number to be dialed for the automatic call function. If this item is blank, thefunction is disabled.Setting options: 0-15 characters (0-9,*,#,+)Default setting: blankBabyCall timeout [s] Function No.: 181Time between line Off-Hook and automatic call beginning (if enabled). During thistimeout EasyGate waits for dialing that cancels the automatic call. You can makestandard call if the BabyCall function is enabled.Setting options: 0-15 sSetting step: 1 sDefault setting: 0 sFXS Routing ParametersAll parameters related to the number dialed for an outgoing call are arranged in thistable. According to the prefix you can:n Bar the number to be dialed - the calling subscriber hears the busy tone;n Accelerate connection establishing by knowing the number length for thegiven prefix;n Accelerate connection establishing by allowing to terminate dialing with a #;n Modify the number to be dialed by removing and/or adding digits.n Set tariff metering for the given prefix.n Set time limit for callEvery table line includes a prefix (of variable length) plus parameters that defineEasyGate's behavior in case the beginning of the dialed number matches this prefix.The table can contain up to 120 different prefixes.There may be exceptions to the rule - a number may start with the same digits buthas to be served in a different way. Any table line that starts with the same prefixfollowed by one or more digits is considered an exception of the line with shorterprefix.Remember to complete the "Other numbers" line for a number whose prefix is notincluded in the table.