2N EasyGate Pro User Manual

Also see for EasyGate Pro: User manual Quick start Quick start Quick start Quick start

Contents

2N EasyGate Pro User Manual Manual pdf 24 page image

2N® EasyGate Pro parameters configuration 3.1243.1 2N® EasyGate Pro parametersconfigurationPC ConnectionAn USB cable is added to the package. Use it to interconnection PC and EasyGate.Cautionn If is used another USB cable make sure that a longer cable works properlyto avoid errors at high transmission rates.EasyGate Parameter ProgrammingAll EasyGate parameters have such default values that meet most users’ demands andneed not be changed. To change EasyGate parameters in spite of that, you can either:n Use a PC with the PCManager UNI installed. All functions supported byEasyGate can be set using the PC.n Or use the DTMF programming on a telephone line. Not all functions can beset in this way.Telephone Line based Programming1. Hook off the telephone, you can hear the dial tone or the busy tone, and theLine LED starts flashing.2. Enter the service password (12345 by default, can be changed) with theDTMF; to cancel a wrong password hang up before sending the character.3. To confirm password enter a .4. If you have entered a correct password, you hear the confirmation tone. Ifnot, the dialed number may be sent to the mobile network as a call. Toprevent this, hang up when you do not hear the confirmation tone.5. EasyGate shall remain in the programming mode until hang-up.6. Enter the number of the parameter to be programmed and press a . If theparameter number is correct, you can hear the confirmation tone, if not, youget the refusal tone and can re-enter the parameter number.7. When the parameter number is confirmed, enter the allowed parameter valueand press a . If the parameter value is in the allowed range, you can hearthe saving tone, if not, you get the refusal tone. You can enter anotherparameter number in either case.Numeric parameters are programmed using numbers in units included in theparameter description. For YES/NO parameters use for YES and for NO.