2N EasyGate Pro User Manual

Also see for EasyGate Pro: User manual Quick start Quick start Quick start Quick start

Contents

2N EasyGate Pro User Manual Manual pdf 14 page image

Description 2.1142.1 DescriptionEasyGate consites of GSM (UMTS) gateway in white plastic cover, removable antennaand cables for connecting to phone set and PC2N® EasyGate ’s status is indicated by LED diodes on its front side. All possible statesare described in the following figure.USB(USB 2.0)Power supplyconnector(DC Jack 2.1 mm,internal contact +)Telephoneline(RJ 12, 6/2)SMS connector(SMS sending input)SIM Switch(ON/OFF)Figure 2.2EasyGateConnectorsFigure 2.1EasyGate LEDindicatorsNo light StandbyFlashes quickly line off-hook or ringingLights yellow call FXS – GSM (UMTS)Fax models only:Flashes 2x then pauseFax or modem connection inprogress; after power onsignalizes need of FW upgradeFlashes 3x then pausefax or modem connection inprogressTelephone lineLights blue device is powered from the grid.Lights yellow device is powered from thebattery.Flashes 1x in 2s HW error, contact themanufacturerNo light Power switched off or HW errorPower supplyLights blue Registered to GSM (UMTS)Flashes:1x in 1s not registered, SIM card inserted1x in 3s not registered,SIM card not inserted4x quickly enter your PIN8x quickly enter your PUK (use mobilephone)Quickly and continuouslyAll functions are blocked. Your SIM doesn’tcorrespond to the operator lock.Mobile networkLights green PC connectedFlashes:Quickly incoming data call (CSD)1x in 3s data connection (CSD or GPRS)No light PC not connectedData – PC connection statusSteady state – signalization of signalstrengthFXS line off hook – signalization ofbattery state (battery backup type only)Signal strength/battery indicator