2N EasyGate Pro User Manual

Also see for EasyGate Pro: User manual Quick start Quick start Quick start Quick start

Contents

2N EasyGate Pro User Manual Manual pdf 39 page image

Table of Parameters 3.239for example received CLI +420603198222 corresponds with settings:CLI - calling number Substring+420603198222 any setting+420603 any setting+420 any setting603198222 4, or more603 4, or moreSetting options: 0-15Step: 1Default setting: 0Route to Function No.: 591It is possible to route incoming call from mobile network to FXS interface orreject it. When the call is routed to FXS port you can use the CallBack feature.For correct functionality please set up "Max. ring time for Callback" parameter.Setting options: FXS (0) -incoming call is routed to FXSFXS CallBack (2) -incoming call is routed to FXS withCallBack functionalityReject (4) -incoming call is rejectedDefault setting: FXSDial in Function No.: 592Parameter "Dial in" is used for automatic connection to switchboard operator, ordirectly to other subscriber. If this parameter is blank, calling person hastelephone line fully at disposal and has to dial the subscriber number by DTMF.You can fill only # character to disable Dial in function.Setting options: 0-16 characters (0-9,*,#)Default setting: blankTime limit [min] Function No.: 599After time elapsing is call connection terminated immediately. You can hear beep30s before end of call. 10s before end you can hear beep every second. The "0"setting means that the function is disabled.Setting options: 0-255 minSetting step: 1 minDefault setting: 0 minFree minutes bankSee section 4.6 for detailed description. This option can be used with Firmware 3.5xonly.