OneStart

Menu

D-Link DWL-6610AP manuals

DWL-6610AP first page preview

DWL-6610AP

Brand: D-Link | Category: Wireless Access Point
Table of contents
  1. a ccess p oint
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Section 1 - About This Document
  10. Online Help, Supported Browsers, and Limitations
  11. Section 2 - Getting Started
  12. Wireless Client Requirements
  13. Dynamic and Static IP Addressing on the AP
  14. Figure 2 - Web UI Login Prompt
  15. Figure 3 - Provide Basic Settings
  16. Basic Settings
  17. Connecting to the AP Web Interface by Using the IPv6 Address
  18. Configuring the Ethernet Settings
  19. Configuring IEEE 802.1X Authentication
  20. Using the CLI to Configure 802.1X Authentication Information
  21. Configuring Security on the Wireless Access Point
  22. Section 3 - Viewing Access Point Status
  23. Viewing Events
  24. Configuring the Log Relay Host for Kernel Messages
  25. Viewing Transmit and Receive Statistics
  26. Viewing Associated Wireless Client Information
  27. Figure 9 - Viewing TSPEC Client Associations
  28. Link Integrity Monitoring
  29. Saving and Importing the Known AP List
  30. Viewing Managed AP DHCP Information
  31. Viewing TSPEC AP Statistics Information
  32. Viewing Radio Statistics Information
  33. Viewing Email Alert Operational Status
  34. Section 4 - Managing the Access Point
  35. Table 17 - Ethernet Settings
  36. Wireless Settings
  37. Using the 802.11h Wireless Mode
  38. Modifying Radio Settings
  39. Configuring Radio and VAP Scheduler
  40. Figure 19 - Scheduler Configuration
  41. Scheduler Association Settings
  42. Virtual Access Point Settings
  43. Figure 22 - Modify Virtual Access Point Settings
  44. Table 22 - Virtual Access Point Settings
  45. None (Plain-text)
  46. IEEE 802.1X
  47. Figure 24 - Modify Virtual Access Point Settings (IEEE802.1X)
  48. WPA Personal
  49. WPA Enterprise
  50. Table 26 - WPA Enterprise
  51. Configuring the Wireless Distribution System (WDS)
  52. WEP on WDS Links
  53. WPA/PSK on WDS Links
  54. Configuring a MAC Filter and Station List on the AP
  55. Configuring Load Balancing
  56. Transitioning Between Modes
  57. Configuring 802.1X Authentication
  58. Creating a Management Access Control List (ACL)
  59. Figure 32 - Configure Management Access Control Parameters
  60. Section 5 - Configuring Access Point Services
  61. Configuring SNMP on the Access Point
  62. Figure 34 - SNMP Configuration
  63. Setting the SSH Status
  64. Setting the Telnet Status
  65. Figure 37 - Modify QoS Queue Parameters
  66. Configuring Email Alert
  67. Enabling the Time Settings (NTP)
  68. Figure 39 - Time Settings (NTP)
  69. Section 6 - Configuring SNMPv3
  70. Configuring SNMPv3 Groups
  71. Configuring SNMPv3 Users
  72. Configuring SNMPv3 Targets
  73. Section 7 - Maintaining the Access Point
  74. Restoring the Configuration from a Previously Saved File
  75. Performing AP Maintenance
  76. Figure 50 - Manage Firmware (TFTP)
  77. Packet Capture Configuration and Settings
  78. Packet Capture Parameter Configuration
  79. Remote Packet Capture
  80. Figure 56 - Remote Packet Capture
  81. Packet Capture File Download
  82. Section 8 - Configuring Client Quality of Service (QoS)
  83. Managing Client QoS ACLs
  84. MAC ACLs
  85. Creating a DiffServ Class Map
  86. Defining DiffServ
  87. Table 54 - DiffServ Class Map
  88. Creating a DiffServ Policy Map
  89. Client QoS Status
  90. Configuring RADIUS-Assigned Client QoS Parameters
  91. Table 57 - Client QoS RADIUS Attributes
  92. Section 9 - Clustering Multiple APs
  93. Figure 64 - Manage Access Points In The Cluster (Active)
  94. Removing an Access Point from the Cluster
  95. Sorting Session Information
  96. Configuring and Viewing Channel Management Settings
  97. Viewing Current Channel Assignments and Setting Locks
  98. Viewing Wireless Neighborhood Information
  99. Figure 67 - View Neighboring Access Points
  100. Viewing Details for a Cluster Member
  101. Appendix A - Default AP Settings
  102. Table 66 - UAP Default Settings
  103. Appendix B - Configuration Examples
  104. VAP Configuration from the CLI
  105. Configuring Radio Settings
  106. Radio Configuration Using SNMP
  107. WDS Configuration from the CLI
  108. Clustering APs by Using the CLI
  109. Configuring Client QoS
  110. Figure 76 - Configuring QoS by Using the Web Interface (Rule2)
  111. Figure 78 - Configuring QoS by Using the Web Interface (Class Map Name)
  112. Configuring QoS by Using the CLI
  113. Appendix C - DWL-6700AP Profile and Configuration Table
  114. Appendix D - Statements
DWL-6610AP first page preview

DWL-6610AP

Brand: D-Link | Category: Repeater
Table of contents
  1. user manual
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Table Of Contents
  11. Table Of Contents
  12. Table Of Contents
  13. Table Of Contents
  14. Table Of Contents
  15. Table Of Contents
  16. Table Of Contents
  17. Table Of Contents
  18. Table Of Contents
  19. Table Of Contents
  20. Table Of Contents
  21. Table Of Contents
  22. Table Of Contents
  23. Table Of Contents
  24. Table Of Contents
  25. Table Of Contents
  26. Table Of Contents
  27. Table Of Contents
  28. Table Of Contents
  29. Table Of Contents
  30. Table Of Contents
  31. Table Of Contents
  32. Table Of Contents
  33. Table Of Contents
  34. Table Of Contents
  35. Table Of Contents
  36. Table Of Contents
  37. Table Of Contents
  38. Table Of Contents
  39. Table Of Contents
  40. Table Of Contents
  41. Table Of Contents
  42. Table Of Contents
  43. About This Document
  44. document conventions
  45. Section 1: Getting Started
  46. Booting the Switch
  47. Boot Menu Functions
  48. Start Operational Code
  49. Retrieve Event Log Using XMODEM
  50. Load Configuration Using XMODEM
  51. Run Flash Diagnostics
  52. Update Boot Code
  53. Reset the System
  54. Understanding the User Interfaces
  55. Device View
  56. Navigation Tree View
  57. Configuration and Monitoring Options
  58. Help Page Access
  59. Using SNMP
  60. Section 2: System Administration
  61. System Description
  62. Defining System Information
  63. Viewing Inventory Information
  64. Table 5: Card Configuration Fields
  65. Slot Summary
  66. PoE Configuration
  67. PoE Status
  68. Serial Port
  69. IP Address
  70. Network DHCP Client Options
  71. Figure 16: DHCP Client Options
  72. HTTP Configuration
  73. User Accounts
  74. Table 13: User Accounts Fields
  75. Adding a User Account
  76. Authentication List Configuration
  77. Creating an Authentication List
  78. Authentication List Summary
  79. Login Session
  80. User Login
  81. Assigning a User to an Authentication List
  82. Table 18: Denial of Service Configuration Fields
  83. Multiple Port Mirroring
  84. Adding a Port Mirroring Session
  85. Removing or Modifying a Port Mirroring Session
  86. Table 21: Telnet Session Configuration Fields
  87. Outbound Telnet Client Configuration
  88. Ping Test
  89. TraceRoute
  90. Configuring SNTP Settings
  91. SNTP Settings
  92. SNTP Server Configuration
  93. SNTP Server Status
  94. SNTP Global Status
  95. Figure 33: Global Status
  96. Time Zone Configuration
  97. Summer Time Configuration
  98. Summer Time Recurring Configuration
  99. Clock Detail
  100. Configuring and Viewing Device Port Information
  101. Table 33: Port Configuration Fields
  102. Port Summary
  103. Port Description
  104. Managing and Viewing Logs
  105. Viewing Buffered Log Messages
  106. Command Logger Configuration
  107. Console Log Configuration
  108. event log
  109. Hosts Configuration
  110. Deleting a Remote Logging Host
  111. Table 40: Persistent Log Configuration Fields
  112. Persistent Log
  113. Syslog Configuration
  114. Trap Log
  115. Defining SNMP Parameters
  116. SNMP Community Configuration
  117. Trap Receiver Configuration
  118. Trap Flags
  119. Figure 54: Trap Flags Configuration
  120. Supported MIBs
  121. Managing the DHCP Server
  122. Pool Configuration
  123. Table 49: Pool Configuration Fields
  124. Pool Options
  125. Reset Configuration
  126. Bindings Information
  127. Server Statistics
  128. Conflicts Information
  129. Configuring Time Ranges
  130. Time Range Summary
  131. Time Range Entry Configuration
  132. Configuring DNS
  133. Server Configuration
  134. DNS Host Name IP Mapping Configuration
  135. DNS Host Name IP Mapping Summary
  136. Configuring and Viewing ISDP Information
  137. Cache Table
  138. Interface Configuration
  139. Statistics
  140. Configuring sFlow
  141. sFlow Receiver Configuration
  142. Table 67: sFlow Receiver Configuration
  143. sFlow Poller Configuration
  144. sFlow Sampler Configuration
  145. Viewing System Statistics
  146. Table 70: Switch Detailed Statistics Fields
  147. Switch Summary
  148. Port Detailed
  149. Port Summary Statistics
  150. Section 3: Using System Tools
  151. Reset Passwords to Defaults
  152. Save All Applied Changes
  153. Table 74: Download File to Switch Fields
  154. Downloading a File to the Switch
  155. HTTP File Download
  156. Upload File From Switch (TFTP)
  157. Uploading Files
  158. Figure 89: Multiple Image Service
  159. Viewing the Dual Image Status
  160. Erase Startup-config File
  161. Table 79: AutoInstall Fields
  162. Section 4: Configuring L2 Features
  163. Configuring and Searching the Forwarding Database
  164. MAC Address Table
  165. Searching the Forwarding Database
  166. Figure 95: VLAN Configuration
  167. VLAN Status
  168. VLAN Port Configuration
  169. VLAN Port Summary
  170. Managing Protocol-Based VLANs
  171. Figure 100: Protocol Group
  172. Protocol-Based VLAN Summary
  173. Managing IP Subnet-Based VLANs
  174. IP Subnet-based VLAN Summary
  175. MAC-based VLAN Summary
  176. Double VLAN Tunneling
  177. Double VLAN Tunneling Summary
  178. Voice VLAN Configuration
  179. Reset VLAN Configuration
  180. Configuring Protected Ports
  181. Assigning Ports to a Group
  182. Creating MAC Filters
  183. Adding MAC Filters
  184. Configuring GARP
  185. Table 98: GARP Status Fields
  186. GARP Switch Configuration
  187. GARP Port Configuration
  188. Creating Port Channels (Trunking)
  189. Table 101: Port Channel Configuration Fields
  190. Port Channel Status
  191. Configuring IGMP Snooping
  192. Global Configuration and Status
  194. VLAN Configuration
  196. Multicast Router Configuration
  197. Multicast Router Status
  198. Multicast Router VLAN Configuration
  199. Multicast Router VLAN Status
  200. Configuring IGMP Snooping Queriers
  201. IGMP Snooping Querier VLAN Configuration
  202. IGMP Snooping Querier VLAN Configuration Summary
  203. IGMP Snooping Querier VLAN Status
  204. Configuring MLD Snooping
  212. Configuring MLD Snooping Queriers
  213. MLD Snooping Querier VLAN Configuration
  214. MLD Snooping Querier VLAN Configuration Summary
  215. MLD Snooping Querier VLAN Status
  216. Viewing Multicast Forwarding Database Information
  217. MFDB GMRP Table
  218. MFDB IGMP Snooping Table
  219. MFDB MLD Snooping Table
  220. MFDB Statistics
  221. Configuring Spanning Tree Protocol
  222. Table 132: Spanning Tree Switch Configuration/Status Fields
  223. CST Configuration/Status
  224. MST Configuration/Status
  225. Table 134: Spanning Tree MST Configuration/Status
  226. CST Port Configuration/Status
  227. Table 135: Spanning Tree CST Port Configuration/Status Fields
  228. MST Port Configuration/Status
  229. Table 136: Spanning Tree MST Port Configuration/Status Fields
  231. Configuring DHCP Snooping
  232. DHCP Snooping VLAN Configuration
  233. DHCP Snooping Interface Configuration
  234. Managing LLDP
  235. Global Configuration
  237. Interface Summary
  239. Local Device Information
  240. Local Device Summary
  241. Remote Device Information
  242. Remote Device Summary
  243. LLDP-MED
  244. LLDP-MED Interface Configuration
  245. LLDP-MED Interface Summary
  246. LLDP Local Device Information
  247. LLDP-MED Remote Device Information
  248. Configuring Dynamic ARP Inspection
  249. DAI VLAN Configuration
  250. DAI Interface Configuration
  251. DAI ARP ACL Configuration
  252. DAI ARP ACL Rule Configuration
  253. Dynamic ARP Inspection Statistics
  254. Section 5: Configuring L3 Features
  255. BootP/DHCP Relay Agent Configuration
  256. BOOTP/DHCP Relay Agent Status
  257. Configuring the IP Helper Features
  258. Figure 180: Adding a Global IP Helper Entry
  259. IP Helper Interface Configuration
  260. Figure 182: Adding an IP Helper Entry to an Interface
  261. IP Helper Statistics
  262. Configuring ARP
  263. ARP Create
  264. ARP Table Configuration
  265. Table 169: ARP Table Fields
  266. Viewing ARP Cache
  267. Configuring Global and Interface IP Settings
  268. IP Interface Configuration
  269. IP Statistics
  270. Loopback Interfaces
  271. Creating a New Loopback (IPv4)
  272. Removing a Loopback
  273. Loopbacks Summary
  274. Configuring RIP
  275. RIP Interface Configuration
  276. Table 178: RIP Interface Configuration Fields
  277. Configuring the RIP Interface
  278. RIP Interface Summary
  279. RIP Route Redistribution Configuration
  280. RIP Route Redistribution Summary
  281. Router Discovery
  282. Router Discovery Status
  283. Router
  284. Best Routes Table
  285. Configured (Static) Routes
  286. Deleting a Route
  287. Route Preferences Configuration
  288. VLAN Routing
  289. Creating a VLAN Routing Interface
  290. Deleting a VLAN Router Interface
  291. VLAN Routing Summary
  292. Virtual Router Redundancy Protocol (VRRP)
  293. Virtual Router Configuration
  294. Configuring a Secondary VRRP Address
  295. Creating a New Virtual Router
  296. VRRP Interface Tracking
  297. VRRP Route Tracking Configuration
  298. VRRP Route Tracking
  299. Table 197: Virtual Router Status Fields
  300. Virtual Router Statistics
  301. Section 6: Configuring Quality of Service
  302. Trust Mode Configuration
  303. Figure 219: Trust Mode Configuration
  304. IP DSCP Mapping Configuration
  305. CoS Interface Configuration
  306. CoS Interface Queue Configuration
  307. CoS Interface Queue Status
  308. Configuring Differentiated Services
  309. Figure 224: DiffServ Configuration
  310. Class Configuration
  311. Table 205: DiffServ Class Configuration Fields
  312. DiffServ Class Summary
  313. Policy Configuration
  314. DiffServ Policy Summary
  315. Policy Class Definition
  316. DiffServ Policy Attribute Summary
  317. DiffServ Service Summary
  318. Service Detailed Statistics
  319. Table 210: Service Detailed Statistics Fields
  320. Configuring Auto VoIP
  321. Auto VoIP Summary
  322. Section 7: Configuring Access Control Lists
  323. IP ACL Configuration
  324. IP ACL Rule Configuration
  325. Figure 241: IP ACL Rule Configuration (Extended ACL Rule)
  326. Modifying an IP-based Rule
  327. Adding a New Rule to an IP-based ACL
  328. IP ACL Rule Summary
  329. MAC ACL Configuration
  330. MAC ACL Rule Configuration
  331. Figure 247: MAC ACL Rule Configuration (Permit Action)
  332. Adding a New Rule to a MAC-based ACL
  333. MAC ACL Summary
  334. ACL Interface Configuration
  335. Assigning an ACL to an Interface
  336. Section 8: Managing Device Security
  337. Port Security Administration
  338. Table 217: Port Security Interface Configuration Fields
  339. Port Security Static
  340. Port Security Dynamic
  341. Port Security Violation Status
  342. SSL/Secure HTTP Configuration
  343. Generating Certificates
  344. Figure 257: File Download
  345. Secure Shell (SSH) Configuration
  346. Downloading SSH Host Keys
  347. Captive Portal Configuration
  348. Table 223: Captive Portal Global Configuration
  349. CP Configuration
  350. Changing the Captive Portal Settings
  351. Customizing the Captive Portal Web
  352. Figure 262: CP Web Page Customization — Global Parameters
  353. Figure 263: CP Web Page Customization — Authentication
  354. Figure 265: CP Web Page Customization — Logout
  355. Local User
  356. Adding a Local User
  357. Configuring Users in the Local Database
  358. Configuring Users in a Remote RADIUS Server
  359. Interface Association
  360. CP Global Status
  361. Viewing CP Activation and Activity Status
  362. Table 233: CP Activation and Activity Status
  363. Interface Status
  364. Viewing Interface Capability Status
  365. Client Connection Status
  366. Viewing Client Details
  367. Viewing the Client Statistics
  368. Viewing the Client CP Association Status
  369. SNMP Trap Configuration
  370. RADIUS Configuration
  371. RADIUS Server Configuration
  372. Table 243: RADIUS Server Configuration Fields
  373. Viewing Named Server Status Information
  374. RADIUS Server Statistics
  375. Figure 287: RADIUS Accounting Server Configuration—Server Added
  376. Viewing Named Accounting Server Status
  378. Global Port Access Control Configuration
  379. Port Configuration
  380. Table 248: Port Access Control Port Configuration Fields
  381. Port Access Entity Capability Configuration
  382. Supplicant Port Configuration
  383. Port Status
  384. Figure 296: Port Access Control Status - MAC-based Control Mode
  386. Table 252: Port Access Control Port Summary Fields
  387. Port Access Control Statistics
  388. Client Summary
  389. Port Access Privileges
  390. TACACS+ Settings
  391. TACACS+ Server Configuration
  392. Section 9: Configuring the Wireless Features
  393. D-Link DWS-4000 Series Unified Wireless Switch
  394. DWS-4000 Series Switch and AP Discovery Methods
  395. IP Address of AP Configured in the Switch
  396. Configuring the DHCP Option
  397. Discovery and Peer Switches
  398. Monitoring Status and Statistics
  399. Figure 303: Global WLAN Status/Statistics
  400. Table 258: Global WLAN Status/Statistics
  401. Viewing Switch Status and Statistics Information
  402. Figure 304: Switch Status/Statistics
  403. Viewing IP Discovery Status
  404. Viewing the Peer Switch Configuration Received Status
  405. Viewing the AP Hardware Capability List
  406. AP Hardware Radio Capability
  407. AP Image Capability
  408. Peer Switch Status
  409. Viewing Peer Switch Configuration Status
  410. Viewing Peer Switch Managed AP Status
  411. All AP Status
  412. Managed AP Status
  413. Monitoring AP Status
  414. Viewing Detailed Managed Access Point Status
  415. Viewing Managed Access Point Radio Summary Information
  416. Viewing Managed Access Point Neighbor APs
  417. Viewing Clients Associated with Neighbor Access Points
  418. Table 275: Neighbor AP Clients
  419. Viewing Managed Access Point VAPs
  420. Table 277: Managed Access Point VAP TSPEC Status
  421. Viewing Distributed Tunneling Information
  422. Managed Access Point Statistics
  423. Viewing Managed Access Point Ethernet Statistics
  424. Viewing Managed Access Point Radio Statistics
  425. Viewing Managed Access Point VAP Statistics
  426. Viewing Distributed Tunneling Statistics
  427. AP Authentication Failure Status
  428. Table 285: Access Point Authentication Failure Status
  429. Viewing Details About AP Authentication Failures
  430. AP RF Scan Status
  431. Figure 318: RF Scan
  432. Viewing Details About an AP Detected in the RF Scan
  433. Table 288: Detailed Access Point RF Scan Status
  434. Viewing AP Triangulation Information
  435. Viewing WIDS AP Rogue Classification Information
  436. Table 290: WIDS AP Rogue Classification
  437. AP De-Authentication Attack Status
  438. Associated Client Status/Statistics
  439. Viewing Associated Client Summary Status
  440. Viewing Detailed Associated Client Status
  441. Table 293: Detailed Associated Client Status
  442. Viewing Associated Client QoS Status
  443. Viewing Associated Client Neighbor AP Status
  444. Viewing Associated Client Distributed Tunneling Status
  445. Table 296: Associated Client Distributed Tunneling Status
  446. Viewing Associated Client TSPEC Status
  447. Viewing Associated Client RRM Status
  448. Viewing Associated Client SSID Status
  449. Viewing Associated Client VAP Status
  450. Switch Associated Client Status
  451. Viewing Associated Client Statistics
  452. Viewing Associated Client Session Summary Statistics
  453. Viewing Detailed Associated Client Association Statistics
  454. Viewing Detailed Associated Client Session Statistics
  455. Viewing Detailed Associated Client TSPEC Statistics
  456. Ad Hoc Client Status
  457. Detected Client Status
  458. Figure 340: Detected Client Status
  459. Viewing Detailed Detected Client Status
  460. Viewing WIDS Client Rogue Classification
  461. Figure 342: WIDS Client Rogue Classification
  462. Viewing Detected Client Pre-Authentication History
  463. Viewing Detected Client Triangulation
  464. Viewing Detected Client Roam History
  465. Detected Client Pre-Authentication Summary
  466. Detected Client Roam History Summary
  467. Radio Resource Measurement Status Information
  468. Viewing the RRM Channel Load History
  469. Viewing RRM Neighbors
  470. WDS-Managed AP Information
  471. WDS AP Group Status
  472. WDS Group AP Status Summary
  473. WDS AP Link Status Summary
  474. WDS Group Link Statistics Summary
  475. basic setup
  476. Table 324: Basic Wireless Global Configuration
  477. Wireless Discovery Configuration
  478. L3/IP Discovery
  479. L2/VLAN Discovery
  480. Profile
  481. Radio Configuration
  482. Table 328: Radio Settings
  483. Wireless Default VAP Configuration
  484. Table 329: Default VAP Configuration
  485. Configuring the Default Network
  486. Table 330: Wireless Network Configuration
  487. Configuring AP Security
  488. Figure 363: Static WEP Configuration
  489. Static WEP Rules
  490. Figure 364: WPA Personal Configuration
  491. Valid Access Point Summary
  492. Valid Access Point Configuration
  493. Figure 366: Configuring a Valid AP
  494. Table 335: Valid AP Configuration (Standalone Mode)
  495. Local OUI Database Summary
  496. AP Management
  497. RF Management
  498. Figure 369: RF Channel Plan and Power Configuration
  499. Table 338: RF Channel Plan and Power Adjustment
  500. Viewing the Channel Plan History
  501. Initiating Manual Channel Plan Assignments
  502. Table 340: Manual Channel Plan
  503. Initiating Manual Power Adjustments
  504. Access Point Software Download
  505. Table 342: Software Download
  506. Managed AP Advanced Settings
  507. Debugging the AP
  508. Adjusting the Channel and Power
  509. Table 345: Managed AP Channel/Power Adjust
  510. AP Provisioning
  511. Detailed AP Provisioning Status
  512. Figure 378: AP Provisioning Status—Detail
  513. Advanced Global Settings
  514. Table 348: General Global Configurations
  515. Wireless SNMP Trap Configuration
  516. Table 349: SNMP Traps
  517. Distributed Tunneling Configuration
  518. Device Location Configuration
  519. Wireless Network List
  520. Configuring Networks
  521. Creating, Copying, and Deleting AP Profiles
  522. Figure 385: Configuring an AP Profile
  523. Applying an AP Profile
  524. Figure 386: Applying the AP Profile
  525. Configuring the AP Profile Global Settings
  526. Access Point Profile Radio Configuration
  527. Figure 388: AP Profile Radio Settings
  528. Table 355: Radio Settings
  529. Access Point Profile VAP Configuration
  530. Access Point Profile QoS Configuration
  531. Table 357: QoS Settings
  532. Access Point Profile TSPEC Configuration
  533. Figure 391: AP Profile TSPEC Configuration
  534. Peer Switch
  535. Peer Switch Configuration Enable/Disable
  536. Mutual Authentication
  537. WIDS Security
  538. Table 362: WIDS AP Configuration
  539. WIDS Client Configuration
  540. Table 363: WIDS Client Configuration
  541. Known Client
  542. Table 364: Known Client Summary
  543. Known Client Configuration
  544. Switch Provisioning
  545. Provisioning
  546. Enabling AeroScout™ Engine Support
  547. Figure 401: WDS-Managed AP Group
  548. WDS Managed AP Group Configuration
  549. Figure 403: Edit WDS Managed AP Group Settings
  550. WDS Managed AP Configuration
  551. Figure 405: WDS Managed AP Settings
  552. WDS Link Configuration
  553. WDS Link Create
  554. Locating WLAN Devices
  555. Figure 408: Building
  556. Building Floor
  557. Managed AP Coordinates
  558. Managed AP Location Summary
  559. On-Demand Location Trigger
  560. On-Demand Location Trigger Status
  561. Table 379: On-Demand Location Trigger Global Status
  562. On-Demand Location Trigger Floor Status
  563. AP Triangulation Location
  564. Detailed AP Triangulation Status
  565. Table 382: Detailed AP Triangulation Status
  566. Client Triangulation Location
  568. Table 384: Detailed Client Triangulation Status
  569. AP Scheduler
  570. Visualizing the Wireless Network
  571. Importing and Configuring a Background Image
  572. Setting Up the Graph
  573. Manually Graphing the Components
  574. Figure 424: Device Location Progress Timer
  575. Figure 426: Probable Device Location – Point Solution
  576. Understanding the Menu Options and Icons
  577. Figure 429: Toolbar Icons
  578. Legend Menu
  579. Viewing Component Information
  580. Appendix A: Configuration Examples
  581. Figure 433: VLAN Example Network Diagram
  582. Configuring Multiple Spanning Tree Protocol
  583. Configuring VLAN Routing
  584. Configuring 802.1X Network Access Control
  585. Configuring a Virtual Access Point
  586. Configuring Differentiated Services for VoIP
  587. Configuring a Network with WDS-Managed APs
  588. Configuring a Network to Use WPA2-Enterprise and Dynamic VLANs
  589. Configuring Client Information on the RADIUS Server
  590. Configuring RADIUS Information and AP Profiles on the Switch
  591. Verifying the Configuration
  592. Optimizing WLAN Traffic
  593. Figure 439: Monitoring Managed AP Channels
  594. Running and Applying a Manual Channel Plan
  595. Monitoring the RF Transmission Power Level
  596. Configuring the Automatic Power Adjustment
  597. Load Balancing and WLAN Utilization
  598. Detecting and Preventing Wireless Intrusion
  599. Configuring and Monitoring WIDS/WIPS to Detect Rogue APs
  600. Figure 442: WIDS AP Configuration
  601. Figure 444: All AP Status with Rogue
  602. Figure 446: WIDS Test Discovers Rogue
  603. Figure 448: Rogue AP Mitigation
  604. Using WIDS/WIPS to Detect Rogue Clients
  605. Figure 451: Excessive Authentication Failures
  606. Mitigating a Rogue Client Threat
  607. Limited Warranty
  608. Trademarks
  609. technical support
DWL-6610AP first page preview

DWL-6610AP

Brand: D-Link | Category: Wireless Access Point
Table of contents
  1. quick installation guide
  2. system requirements
  3. hardware overview
  4. configure the access point
  5. federal communication commission interference statement
  6. united states
DWL-6610AP first page preview

DWL-6610AP

Brand: D-Link | Category: Wireless Access Point
Table of contents
  1. quick installation guide
  2. system requirements
  3. hardware overview
  4. configure the access point
  5. federal communication commission interference statement
DWL-6610AP first page preview

DWL-6610AP

Brand: D-Link | Category: Wireless Access Point
DWL-6610AP first page preview

DWL-6610AP

Brand: D-Link | Category: Wireless Access Point
Related products
DWL-6600APDWL-8610APDWL-6700APDWL-8600APDWL-2600APDWL-3600APDAP-1365DHP-W310AVDIR-505DHP-308AV
D-Link categories
Network Router
Switch
Wireless Router
Adapter
Network Hardware
Security Camera
Wireless Access Point
Modem
Extender
IP Camera
More D-Link categories
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved