RADIUS SettingsD-Link Unified Wired and Wireless Access SystemOct. 2015 Page 417D-Link UWS User ManualIf at least one RADIUS accounting server is configured on the switch, and a host address is selected in theAccounting Server Host Address field, then additional fields are available on the Accounting ServerConfiguration page.Figure 287: RADIUS Accounting Server Configuration—Server AddedUse the buttons at the bottom of the page to perform the following actions:• If you make changes to the page, click Submit to apply the changes to the system.• To delete a configured RADIUS accounting server, select the IP address of the server from the RADIUSServer IP Address drop-down menu, and then click Remove.• Click Refresh to update the page with the most current information.Table 245: RADIUS Accounting Server Configuration FieldsField DescriptionAccounting Server HostAddress Use the drop-down menu to select the IP address of the accounting server toview or configure. Select Add to configure additional RADIUS servers.Port Identifies the authentication port the server uses to verify the RADIUSaccounting server authentication. The port is a UDP port, and the valid rangeis 1-65535. The default port for RADIUS accounting is 1813.Secret Specifies the shared secret to use with the specified accounting server. Thisfield is only displayed if you are logged into the switch with READWRITEaccess.Apply The Secret will only be applied if this box is checked. If the box is not checked,anything entered in the Secret field will have no affect and will not beretained. This field is only displayed if you are logged into the switch withREADWRITE access.Secret Configured Indicates whether the shared secret for this server has been configured.RADIUS Accounting ServerName Enter the name of the RADIUS accounting server.The name can contain up to 32 alphanumeric characters. Spaces, hyphens,and underscores are also permitted. If you do not assign a name, the server isassigned the default name Default-RADIUS-Server.You can use the same name for multiple RADIUS accounting servers. RADIUSclients can use accounting servers with the same name as backups for eachother.
