Managing the DHCP ServerD-Link Unified Wired and Wireless Access SystemOct. 2015 Page 137D-Link UWS User ManualReset ConfigurationUse the Reset Configuration page to clear IP address bindings between that the DHCP server assigned to theclient.To access the Reset Configuration page, click LAN > Administration > DHCP Server > Reset Configuration inthe navigation tree.Figure 59: Reset Configuration• After you select the bindings or conflicts to clear and, if necessary, enter the specific IP address, click Clearto remove the binding from the DHCP server.Table 51: Reset Configuration FieldsField DescriptionClear Specifies what to clear from the DHCP server database:• All Dynamic Bindings: Deletes all dynamic bindings from all address pools.• Specific Dynamic Binding: Deletes the specified binding.• All Address Conflicts: Deletes all address conflicts from the DHCP serverdatabase.• Specific Address Conflict: Deletes a specified conflicting address from thedatabase.Clear IP Address If you select Specific Dynamic Bindings or Specific Address Conflicts from theClear field, the screen refreshes and the Clear IP Address field appears. Enterthe specific IP address to clear from the DHCP server.
