Optimizing WLAN TrafficD-Link Unified Wired and Wireless Access SystemOct. 2015 Page 720D-Link UWS User ManualConfiguring the Automatic Power AdjustmentThis example describes how to run and apply the Automatic Power Adjustment (APA) algorithm.1. To adjust the minimum power level setting on the AP profile, go to the WLAN > Administration > BasicSettings > Radio page and set the Minimum Power field to a percentage lower than 100, for example 60%.2. Click Submit.3. Optionally, select Radio 2 and configure the Minimum Power setting, and then click Submit.4. If the APs are already managed, use the following steps to reapply the profile so the new settings takeeffect:a. Go to the WLAN > Administration > Advanced Configuration > AP Profiles page.b. Select the check box next to the profile you modified.c. Click Apply.
