36 ClearStream CS615 User Manual - Copyright © 2008, 2007 Ziova CorporationSetting Up Your ClearStreamInfoThe Info page displays device information about your player. This information is usedfor informational purposes and can be used for trouble shooting network issues, etc.Current Version Displays the current version of firmware installed on your player.IP Address The IP address your player is using on the network. If ‘NA’ is displayed itmeans your player does not have a valid IP address. This will onlyhappen if your IP address is set to ‘AUTO’ and your player cannot contacta valid DHCP server on the network.Subnet Mask The subnet mask your player is using. If ‘NA’ is displayed it means yourplayer does not have valid IP settings. See the IP address at the top ofthis table for more information.Gateway The gateway your player is using. If ‘NA’ is displayed it means your playerdoes not have valid IP settings. See the IP address at the top of this tablefor more information.DNS Server The DNS server your player is using. If ‘NA’ is displayed it means yourplayer does not have valid IP settings. See the IP address at the top ofthis table for more information.Restore Factory Default SettingsYou can restore your player to Factory default settings by clicking ‘Restore FactoryDefaults’ in the ‘Settings’ page.Please note that you can also perform the below steps using just the front panel display ifyour TV settings are incorrect and you cannot see the screen.1. Go to ‘Settings’2. Scroll down to ‘Restore Factory Defaults’3. Press ‘OK’4. Choose ‘YES’ to confirm.