ZIEHL-ABEGG Icontrol FXDM Series Operating Instructions Manual

Also see for Icontrol FXDM: Operating instructions

Contents

ZIEHL-ABEGG Icontrol FXDM Series Operating Instructions Manual Manual pdf 27 page image

Step 4 valueStep 4 valueFactory setting: |- - - -|Setting range: Step 3 value - 50.0 Hz ** (or Step 5 value)Step 5 valueStep 5 valueFactory setting: |- - - -|Setting range: Step 4 value - 50.0 Hz *** Minimal setting range depending on setting “Shutdown Freq.” ( “Motor Setup”).** Maximal setting range depending on setting “Max. Speed” ( “setting”).Menu group “setting” (only when needed)SettingSettingSetting directSetting direct (at Number steps: 0 “Base setup”)If the setting is to be made during operation directly with the ▼ + ▲ keys, no setting isnecessary here ( setting in operation 1.02 ).Setting range: Min. Speed - Max. SpeedFactory setting: 50.0 Hz ( Max. Speed)Setting StepSetting step (at Number steps: 1 - 5 “Base setup”)If the setting is to be made during operation directly with the ▼ + ▲ keys, no setting isnecessary here ( setting in operation 1.02 ).Setting range: 0 - setting nummber stepsFactory setting: 0When setting a “Minimal speed” > |OFF| the output is not switched off in step “0”!Min. SpeedMin. Speed (basic speed only when needed)Setting range: |OFF| → “Shutdown Freq.” ( Motor Setup) - “Max. Speed”.Factory setting: |OFF |Max. SpeedMax. Speed (speed limitation only when needed)Setting range: “Max. Frequency” ( Motor Setup) - “Min. Speed”Factory setting: 50.0 Hz9.1.4 Setting in operation 1.02After installation is completed, only the “Setting direct” or “Setting Step” setting is visible in the“Info” menu group. All other menus are protected by a PIN.InfoInfoOnly “Setting direct” or “Setting Step” is visible.Setting directSetting direct (at Number steps: 0 “Base setup”)Setting range: Min. Speed - Max. SpeedFactory setting: 50.0 Hz ( Max. Speed)The value set by the ▼ + ▲ keys is accepted and executed directly (P key withoutfunction).Operating Instructions Icontrol – model series FXDM ProgrammingL-BAL-E036-GB 1422 Index 008 Part.-No. 00154773-GB27/96