7.13 Servomotor Model Display (Fn011)7-217 Utility Functions (Fn)7.13 Servomotor Model Display (Fn011)This function is used to check the servomotor model, voltage, capacity, encoder type, and encoder resolution.If the SERVOPACK has been custom-made, you can also check the specification codes of SERVOPACKs.Follow the steps below.Step Display afterOperation Keys Operation1 Press the MODE/SET Key to select the utility functionmode.2 Press the UP or DOWN Key to select Fn011.3Press the DATA/SHIFT Key for approximately one secondto display the servomotor model and voltage code.4Press the MODE/SET Key to display the servomotor capac-ity.5Press the MODE/SET Key, and the encoder type and reso-lution code will be displayed.6Press the MODE/SET Key to display the SERVOPACK’scode for custom orders.* The display "y.0000" means standard model.7 Press the DATA/SHIFT Key for approximately one second."Fn011" is displayed again.MODE /SET DATA/MODE/SET DATA/MODE/SET DATA/Servomotor VoltageData Type400 VAC02200 VAC01Servomotor ModelData Modellinear motor40MODE /SET DATA/Servomotor capacity in units of 10 WThe above example indicates 100 WMODE /SET DATA/Encoder TypeData TypeIncremental00Absolute01Encoder ResolutionData Resolution8-bit812-bit12MODE /SET DATA/Code for custom ordersMODE/SET DATA/
