DocuColor 240/250DocuColor 240/250 Training and Information Guide 181The Touch Screen is not Bright EnoughUse the Brightness Dial on the left side of the control panel to adjust thebrightness of the Touch Screen.The machine displays a memory full error messageCheck with the key operator about available memory.Divide the remaining pages of your job into several small jobs and run the jobagain.The machine does not accept documents into memoryCheck with the key operator about available memory capacity.If the memory is almost full, print and delete unnecessary files.The machine will not power ONCheck the power cord installation.Firmly press the ON/OFF button.Check to see if the AC outlet is receiving voltage. (Connect another appliance tothe outlet to verify voltage.)A print document will not printCheck the required resource is available. You might need to ask the keyoperator to change the settings.Report documents will not printYou might need to ask the key operator to change the settings. For example, ifyou want to print on blue paper and the key operator has disabled printing onblue paper, you cannot use it unless the key operator enables printing on thatspecific type of paper.With an external control device connected, the machine displays Ready toCopy, but users cannot log inCheck the external device to ensure that it is properly connected and poweredon.Documents will not feed correctlyIf you are experiencing problems feeding certain types of document ensure thatthe document media is suitable for the Document Handler. Alternatively you canplace the documents on the Document Glass.
