| 
Control Panel - 1 of 21234567891013111214161715No. Component Function1 Touch Screen This display displays messages required for operation and buttons for variousfeatures. You can directly touch the touch screen to instruct operations in screens andset features.2 Used to call a custom feature.3 Used to display the [All Services] screen.In text descriptions, this button is indicated as the button. You canchange the features that appear in the [All Services] screen.4 If the machine is not operated for a while, the machine’s power consumption islowered to enter the Power Saver mode. In the Power Saver mode, this button is lit.To cancel the Power Saver mode, press this button again. In text descriptions, thisbutton is indicated as the button.5 Returns the statuses of all displayed services to their default values. The machinewill be reset to the state after it is turned on. In text descriptions, these buttons areindicated as the button.6 Select this button to temporarily stop a continuous copy job or printing to give anoth-er job higher priority. During an interrupt, the Interrupt indicator is lit. Pressing theInterrupt button again cancels the interrupt and the previous operation is resumed. Intext descriptions, this button is indicated as the button.7 Press this button to stop the current copy job or communications. In text descrip-tions, this button is indicated as the button.8 Press this button to start copying or scanning.In text descriptions, this button is indicated as the button.9 Numeric keypad Press these buttons to enter the number of copies, passwords and other numericalvalues. In text descriptions, these buttons are indicated as the “numeric keypad”.10 (Clear) Press this button if you have entered a wrong numerical value with the numerickeypad. In text descriptions, this button is indicated as the button.11 When this button is pressed, if in System Administration mode, or Login Setup/Auditron Administration is in effect, the UserID input screen is displayed. In textdescriptions, this button is indicated as the button.12 Pressing this button allows you to confirm the machine status, meters and the state ofconsumables, and print reports.In text descriptions, this button is indicated as the button.13 Press this button to open the Review screen. In this screen, you can check a list ofthe status of copy and scan features whose settings have changed from the defaults.You can also check the destination information for sending e-mail.In text descriptions, these buttons are indicated as the button.14 Pressing this button allows you to confirm or cancel currently executing or com-pleted jobs, or to confirm or print saved documents. In text descriptions, this buttonis indicated as the button.15 Brightness dial Adjusts the brightness of the touch screen. Use this dial to adjust the brightness oftouch screen when it is too dark to read.16 indicatorThis indicator lights when data is stored in the machine’s memory.17 indicator This indicator lights when data is being transmitted from this machine or receivedfrom a client.
|
