Xerox DocuColor 240 Supplementary Manual

Also see for DC240 - DocuColor 240 Color Laser: Quick start guide Release note Hardware replacement guide Quick start guide

Contents

Xerox DocuColor 240 Supplementary Manual Manual pdf 172 page image

DocuColor 240/250DocuColor 240/250 Training and Information Guide 172Tray 5 Paper JamsThis section describes how to clear paper jams that occur in Tray 5 (Bypass).1. Open the Tray 5 Cover. Inspect the paper feed entrance area and removeany jammed paper.2. When two or more sheets of paper are loaded, remove all of the sheetsfrom the tray.3. Close the Tray 5 Cover.NOTE: If paper is torn, check for any torn pieces of paper inside themachine.4. Fan the paper you removed making sure that all four corners are neatlyaligned.5. Insert the paper into the Tray with the printing side facing up until its leadedge lightly touches the paper feed entrance.Transfer Module Paper JamsThis section describes how to clear paper jams that occur in the Transfer Modulearea.1. Make sure that the machine has stopped. After the machine has stopped,open the front door.2. Turn Handle 2 to the right until it is in the horizontal position, then pull outthe transfer module.Warning: Never touch a labeled area (found on the fuser unit ornearby) indicating “High Temperature” and “Caution”.You may get burned.3. Remove the visible jammed paper.4. Move Handle 2a to the right and remove any jammed paper.5. Pull down Handle 2b and remove the jammed paper.6. Return Handle 2a and Handle 2b to their original position. Push in thetransfer module completely and turn Handle 2 to the left.7. Close the front cover.