Xerox Digital copier printers User Manual

Also see for Phaser 750DP: Getting started Reference guide Administrator's guide Service manual Manual

Contents

Xerox Digital copier printers User Manual Manual pdf 125 page image

CC-7 TroubleshootingProblems with print quality.If this happens: Try this:Print settings for your joboutput do not match thesettings you gave• Make sure that you did not override the setting for the job in another place.For information about options and overrides, see Appendix D "Setting Job Overrides."You get poor printing results • Does your application require the Fiery SI’s printer description files?If you are printing from an application such as Adobe Separator or PageMaker,MacroMedia FreeHand, or QuarkXPress, you should make sure that the Fiery SI printerdescription file is installed correctly. For information about installing these files, seeGetting Started.• Calibrate your copier.Separations do not combineproperly• Make sure that the file was initially created as separations.• If you are printing separations or a DCS format file, check the Combine Separationssetting for the job in the Print Options (Macintosh) or Features (Windows) dialog box.With Combine Separations On, all four colors will be printed on a single page; withCombine Separations Off, four black-and white pages will print to simulate four single-color plates.The registration or colors of animage are not what youexpected• Print a test page or make a test copy with the copier.The problem may be with the copier. If your test page or copy show that the copier isworking properly, correct the problem within your application software. If the test pageor copy are wrong, your copier may need to be calibrated or adjusted in some other way.Your printed file appears toodark• Adjust the image’s Brightness setting in the Print Options (Macintosh), Print Features(Adobe PostScript Printer Driver for Windows), Device Options (Windows 95 PostScriptPrinter Driver), Download (Fiery XJ Downloader), or Override Print Settings (Fiery XJSpooler) dialog box.You can use the Brightness options in the Fiery XJ Downloader to adjust the lightness ofyour image whenever you print a PostScript or Encapsulated PostScript (EPS) file.