Xerox Digital copier printers User Manual

Also see for Phaser 750DP: Getting started Reference guide Administrator's guide Service manual Manual

Contents

Xerox Digital copier printers User Manual Manual pdf 124 page image

CC-6 TroubleshootingJobs sent to the parallel portdo not print• Increase the parallel “Port Timeout in Seconds” on the Fiery SI Control Panel• On the Fiery SI Control Panel, change the Ignore EOF Character setting.If you are printing ASCII format PostScript only, set Ignore EOF Character to No.If you are printing Binary format PostScript, set it to Yes.• If you print using the DOS copy command, make sure to use the /b option when printingbinary files.• Restart your PC, enter BIOS setup, and if you have a BIOS setting for the parallel port,make sure that it is set to Compatible mode and not to Bi-Directional, ECP, EPP, or anyother mode.• If you are using Windows 95, open the System Properties control panel, click the DeviceManager tab, click Ports, double-click the parallel port you are using, and make sure thatthe driver selected is the standard Printer Port driver instead of the ECP Port, EPP Port,or any other driver.For information about changing this setting, see your Windows 95 documentation.• If the PostScript Printer Driver that you are using lets you select bi-directionalcommunication, make sure that it is disabled.This is generally set from the Properties dialog box for the printer. If you are printingfrom a DOS window on a Windows 95 PC, display the Properties dialog box for theprinter, click the Details tab, and then click Port Settings. In the Configure LPT port boxthat displays, turn the “Spool MS-DOS print jobs” option off.If this happens: Try this: