Xerox Digital copier printers User Manual

Also see for Phaser 750DP: Getting started Reference guide Administrator's guide Service manual Manual

Contents

Xerox Digital copier printers User Manual Manual pdf 28 page image

22-4 Printing with Macintosh Computers8. Click Save after you change the options to make the new settings your defaultsettings.For information about these options, see Appendix D "Setting Job Overrides."9. Click OK to accept your options, and click Print to print.Printing pages from the bypass trayYou can use the Fiery SI to print manually fed pages on the copier if you want to printon special paper or transparencies. You can use the Fiery SI to print on 16–24 poundpaper (60–90 gsm), thick paper (28–32 pound/105–120 gsm) or Xerox-recommendedtransparencies from the bypass tray. You can also use the bypass tray for paper sizessuch as A6 and 11” x 18” (model 5750 only).There are several ways to print manually fed pages:• From the Control Panel, you can set Enable Bypass Tray as default to Yes to print alljobs from the Bypass Tray unless another tray is specified.• From within the Fiery XJ Spooler, select a job, choose Override Print Settings andset the Bypass Tray option to On .• For many applications, you can use the following procedure and choose Bypass Trayin the Print or Page Setup dialog box.T O PRINT PAGES USING THE BYPASS TRAY :1. Make sure that the Use Bypass Tray option on the copier panel is set to No.N OTE : If you select Bypass as your paper supply on the copier, the copier will be inCopier Mode and unavailable for printing.2. Load paper or transparencies into the bypass tray.You can load up to 40 sheets.3. Press the Clear All button on the copier.