ICON10 / ICON1Flow Meter Setup• If a flow meter will be used in this application con-tinue with step 1.• If a flow meter will not be used in this applicationcontinue with step 6.To set the Flow Meter follow these steps:1. Push Menu, System, Data, and Flow/Hours todisplay the Flow/Hours screen. See Figure 38-1.2. Select the Flow Multiplier field. See Figure 38-1.3. Using the numeric keypad, enter the manufactur-er’s recommended pulse multiplier value in eithergallons per pulse or liters per pulse, dependingon the unit of measure.4. To enable the Low Flow Limit, select the LowFlow Limit field to open the numeric keypad.5. Push the Low Flow Limit field to enter theminimum flow rate value into the numeric keypadand push Enter to retain the value. The range is1-999 gpm (lpm).NOTE• The Low Flow Limit will automatically beenabled when a valid number is enteredinto the keypad, this will be indicatedwhen the Low Flow Limit checkbox be-comes checked. A value of 0 disables theLow Flow Limit.123456Figure 38-1 1. Menu2. System3. Data4. Flow/Hours5. Flow Multiplier6. Low Flow Limit Field38Setup
