Vacon 50X User Manual

Contents

Vacon 50X User Manual Manual pdf 114 page image

113 z vacon summary of vacon 50x parametersTel. +358 (0)201 2121 • Fax +358 (0)201 2122051212. Summary of Vacon 50X Parameters12.1 Default SettingsNo. Parameter Name Options Default User Setting See Page001 Model Number Model Dependent Read-only 60002 Software Rev 0.00–99.99 Read-only 60003 Rated Current 0.0–200.0 A Read-only 60005 Serial No. 1 0–65535 Read-only 60006 Serial No. 2 0–65535 Read-only 60010 Last Fault text string Read-only 60025 4th Fault text string Read-only 60040 3rd Fault text string Read-only 60055 2nd Fault text string Read-only 61070 1st Fault text string Read-only 61102 Output Freq 0.0–400.0 Hz Read-only 61103 Output Voltage 0–600 V Read-only 61104 Output Current 0.0–200.0 A Read-only 61105 Drive Load –200.0–200.0% Read-only 61106 Load Torque –200.0–200.0% Read-only 61107 Drive Temp –20.0–200.0 °C Read-only 61108 Total Run Time 0.0–6553.5 h Read-only 61109 Power On Hours 0–65535 h Read-only 62110 Stator Freq 0.0–400.0 Hz Read-only 62111 DC Bus Voltage 0–1000 Vdc Read-only 62115 Drive Power Out 0.0–200.0% Read-only 62201 Input Mode text string Local Only 62202 Rev Enable text string Forward 63203 Stop Key Remote text string Coast 63204 Ref Select text string Vin1 63205 Vin1 Config text string 0–10V 64206 Vin1 Offset 0.0–100.0% 0.00% 64207 Vin1 Span 10.0–200.0% 100.00% 64208 Cin Config text string 0–20mA 50 64209 Cin Offset 0.0–100.0% 0.0% 65210 Cin Span 10.0–200.0% 100.0% 65211 Vin2 Config text string 0–10V 65212 Vin2 Offset 0.0–100.0% 0.00% 65213 Vin2 Span 10.0–200.0% 100.00% 65214 Vin1 Filter Time 0–1000 ms 20 ms 66215 Cin Filter Time 0–1000 ms 20 ms 66216 Vin2 Filter Time 0–1000 ms 20 ms 66217 Trim Ref Enable text string Disabled 66218 Trim % Factor –100.0 to 100.0% 0.0% 66222 Ref Loss Fault text string Disabled 66301 Min Frequency 0.0–Max Freq. 0.0 Hz 67302 Max Frequency 20.0–400.0 Hz 60.0 Hz 67303 Preset Freq 1 Min Freq–Max Freq 5.0 Hz 67